 |
Ryebrook Resins offer a range of levelling screeds and coating screeds for environments where floor coating is not suitable, as the floors are not smooth or as level and as stable as they should be. Ryebrook produce a wide variety of epoxy resin and polyurethane flooring screeds, ranging in thickness, colour and load resistance, impact resistance, abrasion resistance, chemical resistance, slip resistance and bacterial resistance to meet the varying screed flooring demands of such environments within the commercial, industrial and public sectors.
Polymer screed systems are used to enhance the physical properties of cement-based floor screeds and repair compounds, improving the strength. Floors can be levelled or gradients easily formed. Polymer Screeds have a high bond capacity, which then allows for the screed to be overcoated with a thin seamless resin system. Polyurethane floor screeds are typically applied at a thickness of 6mm - 9mm, providing excellent resistance to abrasion, heat and chemical attack and other physical aggression.
Epoxy resin screeds provide a heavy duty, chemical resistant, hard wearing floor surface. Typically applied at a thickness of 4mm - 6mm, an ideal flooring solution in wet and dry process industries which are subject to heavy traffic and light chemical attack. It cures rapidly, giving a heavy duty floor finish with a decorative and excellent abrasive resistance.
Ryebrook’s floor screed solutions are listed below. For more detailed information on our floor screeding products please see the relevant data sheets or contact us.
| RYEFAST |
Pump applied polymer screed laid at a thickness of 6mm-30mm to give an industrial grade finish. Ryefast provides a very durable floor surface possessing excellent abrasion resistance and durability under heavy pedestrian and general forklift traffic. Ryefast floor screed is self smoothing, providing a smooth even flooring finish. Ideally used for resurfacing old or damaged concrete and as a finish in industrial and commercial premises. |
| |
|
| RYETOP |
Polymer resin heavy duty based grano screed flooring system normally laid at 12mm as a finished surface or 12mm-50mm as an underlayment in industrial situations. |
| |
|
| RYECRETE
TZ |
Solvent free, resin rich, epoxy resin terrazzo screed. This floor is laid at 8mm and enhanced by grinding to expose the terrazzo aggregate in the resin giving a smooth, decorative, chemical resistant, hard wearing finish. Typical installations include prestige industrial areas such as pharmaceutical, retail, foyers and museums |
| |
|
| RYECRETE |
A heavy duty solvent free, rich epoxy resin screed laid un-ground at 6mm-9mm. Designed to meet the demand for a completely non-porous, chemically resistant, hard wearing, slip resistant, seamless floor topping with a solid colour, speckled aggregate finish. |
| |
|
| RYESCREED |
Solvent free epoxy floor screed laid at 4mm – 6mm for use in commercial and light industrial areas. |
| |
|
| RYESCREED
QUARTZ |
Solvent free decorative epoxy screed solution laid at 4mm-6mm. Typically used in industrial and commercial sectors where a more decorative finish is required. For example, dry food preparation areas, pharmaceuticals, work canteens, laboratories, and shower/toilet areas. |
|
| |
|
| RYEFLOW |
Solvent free self smoothing epoxy resin screed, generally laid from 2mm-5mm in thickness. Used in both industrial and commercial installations where a seamless, smooth, hygienic easily cleanable surface is required, such as storage areas, dry processing, engineering, laboratories etc. |
|
| |
|
| RYEFLOW FLEC |
Solvent free self smoothing epoxy resin screed, generally laid at 2mm in thickness incorporating a decorative speckled finish. Ideal for commercial installations with intense traffic such as shops, department stores, restaurants, garden centres, garages and airports. As well as industrial installations where a seamless, smooth hygienic easily cleanable surface is required. |
|
| |
|
| RYEFLOW
SAFECELL PLUS |
Solvent free self smoothing epoxy resin floor screed with a slightly textured finish to give a hard wearing seamless, anti-slip surface. This system was specially designed and approved by the Home Office for use in prisons and police cells. |
|
| |
|
| RYETHANE 2000 - 5000 |
Solvent free self smoothing polyurethane floor screed, generally laid from 2mm-5mm in thickness. Used in both industrial and commercial installations where a seamless, smooth, flexible finish is required |
|
| |
|
| RYEDEC |
An attractive, solvent free seamless floor and wall finish, generally laid from 2mm-5mm in thickness. Ryedec is produced by the combination of an epoxy resin base coat; coloured plastic flakes and clear polyurethane finish coats. The overall finish is a mottled mosaic effect with a slightly uneven slip resistance surface. Ryedec floor screed is typically used in areas requiring an easily cleaned, attractive, heavy duty finish such as toilets, laboratories, hospitals, receptions areas, kitchens etc. |
|
| |
|
| RYEGRIP |
A collective name for a multi-layered solvent free epoxy resin system. Incorporating abrasive aggregates between layers of resin to provide additional slip-resistance, combined with good abrasion and chemical resistance. Ryegrip screeding is used in areas where slip resistance is a priority such as wet process areas in food preparation, breweries, chemical processing, |
| |
|
| RYEFLOR
TZ |
Water dispersed polyurethane resin terrazzo. This screed is laid at 8mm and ground to expose aggregate to give a decorative, highly chemical resistant, hard wearing flooring finish in pharmaceutical, retail and concourse installations |
|
| |
|
| RYEFLOR
HF |
Water dispersed polyurethane resin screed typically laid at 6-9mm. Provides the highest order of durability, hygiene and resistance to abrasion and chemical attack in heavy duty production areas. Typically used for heavy duty flooring solutions including, chemical & food processing, brewing, heavy duty traffic and plant vehicle, and engineering process areas. |
|
| |
|
| RYEFLOR
MD |
Water dispersed self-smoothing polyurethane screed generally laid from 4mm-6mm in thickness. Used in both industrial and commercial flooring installations where a seamless, smooth, hygienic, easily cleanable matt surface is required. |
|
| |
|
| RYEFLOR
SL |
Water dispersed self-smoothing polyurethane laid at 2mm in thickness to provide medium duty wear in both industrial and commercial installations where a seamless, smooth, hygienic easily cleanable matt finish is required, whilst providing an excellent resistance to abrasion, chemical and physical aggression. |
|
For more details on Ryebrook’s flooring systems, please visit the Press Release section to view our satisfied customers flooring installations.
Please Contact Us for a free without obligation survey.
|
)
)
)